4K HDBaseTTM Repeater
TPRep-UH423

The TPRep-UH423 HDBaseT Repeater is designed to extend the signal transmission distance of Matrix system and our Extender sets by repeating the HDBaseT signals at a further distance (4k, 70m;1080p, 100m) over CAT5e/6/7 cable for each unit. With the daisy chain connection, user can connect with up to 6 repeaters for each source output. For instance, MUH88TPR2-N, which has 8 HDBT outputs, can connect with up to 48 repeaters in the system. Besides, it supporting all the essential interfaces connecting with display devices without any additional HDBT receiver, providing a cost-saving solution for users.

Category:

Features

  • Features HDBT input, HDBT output, Audio output and two HDMI outputs.
  • With two RS232 ports, supports point-to-point, one-to-many and one-to-all RS232 control.
  • The input & output video resolution can up to 4Kx2K@60Hz 4:2:0.
  • Supports all-known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio.
  • HDBT ports with distance up to 328ft. (100m) at 1080p and 230ft. (70m) at 4Kx2K over CAT5e/6/7.
  • HDCP2.2 compliant.
  • Supports cascading, at least 6 units can be looped within the same operation system.
  • ID PRESET switcher is designed for assigning the Unit ID.
  • Supports input signal de-embedding.

Specifications

Input & Output
Input Port HDBT IN
Input Connector One (1) RJ45 Receptacle
Input Video Signal The max resolution is up to 4Kx2K/60Hz 4:2:0, compatible with HDCP2.2
Output Port HDMI-1 OUT; HDMI-2-OUT; HDBT OUT; AUDIO OUT
Output Connector Two (2) HDMI Type A Receptacle;

One (1) RJ45 Receptacle;

One (1) 3-Pin phoenix connector
Output Video Signal The max resolution is up to 4Kx2K/60Hz 4:2:0, compatible with HDCP1.4
Embedded Audio Signal Supports PCM/Dobly/DTS
Output Analog Audio Signal Supports PCM
Analog Audio Frequency Response 20 Hz to 20 kHz, ±3 dB
Transmission Mode HDBaseT
Control Part
RS232 Control Ports RS232-1; RS232-2
RS232 Connector Two (2) 3-Pin phoenix connector
Baud Rate 9600
General
Power Supply Input: 100VAC~240VAC, 50/60Hz

Output: 12VDC, 2A
Maximum Power Consumption 14W
Work Temperature -10 ~ +55℃
Humidity 10% ~ 90%
Dimension (W*H*D) 200mm x 25mm x 100mm
Net Weight 357g

Note: All nominal levels are at ±10%.

Reviews

There are no reviews yet.

Be the first to review “4K HDBaseTTM Repeater
TPRep-UH423”

Your email address will not be published. Required fields are marked *

Other products

  • TPRx-UHBYE-new

    HDBaseT video distribution kit
    TPRx-UHBYE

    HDBaseT video distribution kit
    TPRx-UHBYE

    TPRx-UHBYE is a HDBaseT extender for HDMI and bi-directional IR signals, which contains a transmitter and a receiver It transmits 4K signal up to 131ft (40m), 1080P signal up to 230ft (70m) over single Cat5e/Cat6 cable. The extender set supports PoC function, which can save a power supply at the receiver end.

    Quick View
  • 308UH

    Extender Set
    FO-308UH Set

    Extender Set
    FO-308UH Set

    FO-308UH Set is a fully HDMI2.0 compliant fiber extender set with ARC, including a transmitter and a receiver. The extender set is capable of extending 4K@60 4:4:4 HDR video, IR and RS232 over dual multi-mode optical fiber up to 1000ft/300m.

    Quick View
  • IMG_8492-1

    4K HDMI Extender w/IR &RS232
    TP-4100-UH

    4K HDMI Extender w/IR &RS232
    TP-4100-UH

    This product is an HDBaseT Extender set consist of transmitter (TX) and receiver (RX). It distributes HDMI signal via CAT5e/CAT6a/ cable at 70m/PoC, and enables IR and RS232 pass-through to control local source device from remote or far-end display.

    Quick View

"To experience the next level of technology"

Contact Us