Rack mount kit 12 New Aastro

Installation Guide for Mounting Bracket

This guide provide brief introduction and usage method for Mounting Bracket.
HDBaseT Extender is consist of one HDBaseT Transmitter and one HDBaseT Receiver, this Mounting Bracket with12 slots is designed for fixing twelve Transmitters or Receivers.


1. Preparation


Take out all spare parts form the packaging box, and check them carefully. If you find any defective or missing parts, please contact your local dealer.

Packing List:
24 x Support (1) 12 x Support (2) 1 x Main Frame
2 x Panels 2 x Metal Rods 22 x Screws(2.5*5mm)
44 x Screws(3*6mm) 11 x Baffle plates 1 x Fast Operating Guideline

Prepare Spare Parts

Support (1)

Captive Screw
Support (2) HDBaseT Extender (1)


HDBaseT Extender (2)


Main Frame Panels Metal Rods


Screws(3*6mm) Baffle plates
  • Pictures for reference only, subject to our existing products.
  • This Mounting Bracket can fix 12 HDBaseT Transmitters or Receiver.

2. Installation procedure

Step 1. Connect one Support (1) and one Support (2) to HDBaseT Extender (1), and fix them with screws (3*6mm). Step 2. Connect two Supports (1) to HDBaseT Extender (2)

, and fix them with screws (3*6mm).


Step 3. Connect one panel to the one side of main frame with screws (3*6mm).

Step 4. According to Step 3, connect another panel to the other side of main frame with screws (3*6mm).
Step 5. Install two metal rods with screws (3*6mm). Step 6. Put transmitters or receivers insert the slots, and tighten the captive screws.
Step 7. For the empty slots, install baffle plates with screws (2.5*5mm) to cover them.

3. Dimensional Drawing

Dimension (W*H*D) 483.0mm × 221.0mm ×180.0 (External Frame)

155.6mm × 17.0 mm (Internal Square Frame)

Net Weight (g) 2Kg


There are no reviews yet.

Be the first to review “Rack mount kit 12 New Aastro

Your email address will not be published. Required fields are marked *

"To experience the next level of technology"